Skip to content
407 Bolton Rd, Glenside, PA 19038 Mon–Sat: 7 AM – 7 PM

Railroad Tie Removal in Norristown: Why You Pay by Truck Space, Not by the Tie

Railroad Tie Removal Norristown: Priced by Truck Space

Key Takeaways

Yes, we haul railroad ties. The Glenside Junkman (Glenside Elite Junk Removal) prices railroad tie removal by how much of a 12-cubic-yard tandem dump truck your pile fills, not by how many ties you have. The range runs from $150 to $695, and it applies to bulk hauling on Norristown job sites too.

אינפוגרפיקה — Railroad Tie Removal in Norristown: Why You Pay by Truck Space, Not by the Tie

What to know before you call

  • The price follows truck space. Ten ties and fifty ties are both just a fraction of the truck.
  • The minimum is $150 for up to 1/8 of a load. A full load is $695.
  • The truck is a 12-cubic-yard tandem dump.
  • Ties are dense and heavy, so weight can limit a load before space does.
  • Tell us if the ties are creosote-treated when you call.

Do Haulers Take Railroad Ties? Yes, and Here’s the Short Version

We do. Railroad ties, rail ties, landscape timbers pulled out of a retaining wall, all of it counts as hauling work for us.

The price is a fraction of a truckload. A small stack lands at the $150 minimum, and a truck filled to the top costs $695. Everything in between is priced in steps, and the next section lays them out.

One caution. Older ties are often soaked in creosote, and treated wood is regulated differently from plain lumber. Say whether yours are treated when you call, and we’ll confirm what goes on the truck before anyone starts loading. That’s a thirty-second conversation, and it avoids a surprise at the curb.

How Railroad Tie Removal Is Priced: By the Load, Not by the Piece

Railroad Tie Removal in Norristown: Why You Pay by Truck Space, Not by the Tie

You pay for the space your ties take up in the truck. Nobody counts them, and nobody puts them on a scale to set the price. Whatever fraction of the dump bed your pile fills, that’s your tier.

Per-item pricing sounds simple until you have a mixed pile of ties, broken pallets and old fence panels. Per-ton pricing needs a weigh station and a receipt you can’t check. Pricing by truck fill is easier to predict, because you can look at your own pile and judge how much of a truck it makes.

The Price Ladder: 1/8 Load to Full Load

Load size Share of the truck Price
Minimum Up to 1/8 $150
Quarter load 1/4 $250
Half load 1/2 $395
Three-quarter load 3/4 $500
Full load Full truck $695

These are the prices we quote today. Confirm them at booking, since a price list is only as good as its last update.

What ‘A Load’ Means: The 12-Cubic-Yard Tandem Dump Truck

This is where most callers get stuck. A load isn’t a number of items. It’s a volume.

Our truck is a tandem dump with a 12-cubic-yard bed. A cubic yard is a box three feet wide, three feet deep and three feet tall. Picture twelve of those boxes stacked in the truck bed, and you have a full load. A standard pickup bed holds a small part of that, so a full dump truck is several pickup trips in one.

On job-site calls, we usually have to explain this twice before it clicks. Once someone sees the load as a block of space, not a head count, the whole price list makes sense.

How to Estimate Which Tier Your Railroad Ties Fall Into

You can get close with a tape measure and ten minutes. Railroad ties are about the easiest material to estimate, because they’re straight, uniform and stack in rows.

  1. Measure one tie: length, width and thickness. Many standard ties run about 7 inches by 9 inches and 8.5 feet long, but older or reclaimed ones vary.
  2. Count the ties, or measure the stack: length, width and height.
  3. Multiply to get cubic feet. One tie of that standard size is about 3.7 cubic feet.
  4. Compare to the truck. A 12-cubic-yard bed is 324 cubic feet.
  5. Find the fraction, then match it to the price ladder above.

Here is the same math for standard ties stacked tight, with no gaps.

Tier Truck space (cubic feet) Ties, tightly stacked
1/8 load About 40 Around 11
1/4 load About 81 Around 22
1/2 load About 162 Around 43
3/4 load About 243 Around 65
Full load 324 Around 87

Treat those counts as ceilings. Loose stacking wastes space, and the weight issue below can pull the real number lower. Nobody should promise you a ties-per-load figure without seeing the pile.

Measured your stack and not sure which tier it lands in? Call The Glenside Junkman at 267-536-4671, tell us the tie count and size, and we’ll tell you where it falls.

Why Weight Matters Even When Price Is by Volume

Ties are some of the heaviest material a dump truck carries per cubic foot. Every truck has a weight limit, and a bed packed with ties can hit it before the bed is full.

So a big stack may take more than one trip, or the crew may load it to a lower fill line than you’d guess. If you have a lot of ties, say so up front. It’s better to hear that on the phone than in the driveway.

What Happens to the Ties After the Truck Leaves

The crew arrives with the truck, loads the ties by hand and hauls them off to be dumped. That’s the whole flow.

We won’t tell you the ties get recycled or reused, because that depends on what they are and where they go. If you need paperwork or a specific disposal site for treated wood, ask before booking. Don’t assume.

Bulk Hauling on a Norristown Job Site: What Else Fits on the Same Truck

Ties are rarely the only thing left on a job. Old lumber, fencing, landscaping debris and torn-out construction waste usually sit nearby.

Mixed material is priced the same way: by how much of the truck the whole pile fills. That’s the same fill-the-truck logic behind every Junk Removal Glenside job, from one couch to a cleared-out yard. If the job also has a worn sofa, a stack of chairs or a dead fridge, our furniture removal and appliance removal pages cover how those items load.

Norristown is Montgomery County, and so is our home base in Glenside. Give us the job address when you call and we’ll confirm it’s on our route.

Preparing Your Pile: How to Make Pickup Fast

A dump truck is big, and it needs room to back in. A little prep on your end keeps the crew loading instead of moving things around.

Before the truck arrives

Photos matter more than people expect. A clear picture lets us tell you a tier in one call.

Is Hauling Railroad Ties Yourself Worth It?

Sometimes. If you own a truck and the stack is small, doing it yourself can cost less on paper. It stops being cheap once you count the time.

Factor Doing it yourself Hiring a hauler
Cost Truck or trailer, fuel and dump fees One price by load fill
Lifting Every tie by hand, and they’re heavy Crew loads everything
Time on the job Loading plus a drive to the dump You keep working
Disposal rules You find a site that takes treated wood Crew handles the dumping

Our view is simple: if a stack is more than a couple of truckloads of your own back-and-forth, it’s worth pricing out. If you’d rather load at your own pace, dumpster rental is the other route, though ask about weight limits first, since ties add up fast.

Getting a Price for Your Norristown Job

Estimate your tier first, then call. You’ll have a number in mind and we’ll have what we need to confirm it.

Ready to price your railroad tie removal? Call The Glenside Junkman (Glenside Elite Junk Removal) at 267-536-4671. We’re based at 407 Bolton Rd, Glenside, and we take Norristown jobs.

FAQ

Do you haul railroad ties?

Yes. If they’re creosote-treated, mention it when you call so we can confirm what we take.

How much does railroad tie removal cost?

It runs from a $150 minimum for up to 1/8 of a load to $695 for a full load. The ladder above shows every step in between. Your price depends on the space the ties take in the truck.

Is the price based on weight or number of ties?

Neither one sets the price. We charge by how much of the truck your pile fills. Weight still matters for what the truck can safely carry, so tell us if you have a large stack.

How big is the truck?

It’s a 12-cubic-yard tandem dump. That’s twelve three-foot cubes of space, much more than a pickup bed.

What happens to the ties after pickup?

The crew loads them and hauls them off to be dumped. If you need a specific disposal site or paperwork, ask us before booking.

Can you take ties plus other job-site debris in the same trip?

In most cases yes. The whole pile is priced as one load based on fill level. Describe the other material when you call so we can confirm it all goes on the truck.

Do you serve Norristown?

We take Norristown jobs. Give us the address and we’ll confirm.

Share this
Facebook X LinkedIn

Sources

Mike Russo

Owner, The Glenside Junkman

Mike Russo

I'm Mike Russo — owner, operator, and the guy on the truck at The Glenside Junkman. I spent 15 years as a foreman at a commercial moving company in Philadelphia, where every job had a fixed bid signed up front. Homeowners never got that — they got cornered with a price after the truck was already loaded. In 2023 I started The Glenside Junkman to run the homeowner side the right way: real starting prices posted online, a free on-site quote, and a final number locked in writing before anyone lifts a thing. The number I quote is the number on your invoice — to the dollar. If I underquote, that's on me, not you. I've lived in Glenside since 2015, and my wife Christina and I are raising three kids in the Cheltenham schools — so when I clear out a home in Glenside, Cheltenham, Wyncote, or anywhere nearby, it's my neighbors I'm working for. PA-licensed, insured, and accountable to the name on the truck.

More from Mike Russo →

Every article is written from real jobs in the field — actual pickups, real prices, no fluff.

Straight talk, no spam.

Occasional tips on decluttering, pricing, and getting rid of the big stuff — from someone who hauls it for a living.

Keep Reading

Book your junk removal

Pick a time that works. Upfront pricing, no surprises.

Checking today’s availability…